Front wheel bearing update
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 108
- Joined: Mon May 20, 2013 3:30 pm
- MMOC Member: No
Front wheel bearing update
Hi has anyone got any advice on the following. Which way should the bearings face,the ones that are fitted now are as follows. The inner one has the race facing outwards towards the oil seal and the outer one has the race facing outwards towards the castle nut. Am I correct in saying the inner one is the wrong way round ?. This had been fitted by a modern garage before I purchased it and all work carried out by them was wrong so I wanted to check. Thanks.
-
- Minor Maniac
- Posts: 10818
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Front wheel bearing update
http://www.mmoc.org.uk/viewtopic.php?f= ... gs#p556220
Please note that the link shows how they should NOT be fitted.
From your description the ones already fitted to your hubs are fitted correctly.
Phil
Please note that the link shows how they should NOT be fitted.
From your description the ones already fitted to your hubs are fitted correctly.
Phil
-
- Minor Fan
- Posts: 108
- Joined: Mon May 20, 2013 3:30 pm
- MMOC Member: No
Re: Front wheel bearing update
OK many thanks for the link.
Re: Front wheel bearing update
Hi if you look at member Islip minor he has a photo of the bearings and how they should be fitted correctly
The date of his post was 19th May 2013, I printed the photo he posted and have it in my workshop manual for future reference
Hope this helps
Richard
The date of his post was 19th May 2013, I printed the photo he posted and have it in my workshop manual for future reference
Hope this helps
Richard