My horn has the wire for the horn push going down the steering column.
Where does it come out?
Also on my new loom I think the wire is purple and black but it is with the indicator stalk wires where do I conect it?
Horn
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 36
- Joined: Sat May 20, 2023 7:47 pm
- Location: UK
- MMOC Member: Yes
- svenedin
- Minor Legend
- Posts: 1921
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Horn
The wire you refer to does not "come out" anywhere exactly. It provides an electrical link between the horn push (when pressed) and the slip ring on the steering column. The slip ring connects to a copper "brush" or shoe which is part of the indicator assembly. The copper brush is then connected to a wire that runs in a bundle in a black sheath with the other indicator assembly wires. Those wires make their connectors behind the driver's side glovebox into bullet connectors. On older indicator assemblies the horn wire is brown and on the Lucas branded indicator assembly I installed recently it was brown with a black trace.
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen