Hi,
My Trafficator had been working up to week ago, but they started to fail. On taking the switch out from under the dash through the glove box, I discovered on taking it apart it was corroded. I have purchased a new one from a MM supplier. On trying to connect it I had power from the live wire from the cars wiring. I used a bulb tester. Power was going to the left indicator but no power from the wire for the right indicator. Can any offer an advice please.
Trafficator switch
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 63
- Joined: Fri Aug 28, 2009 11:47 am
- Location: Kent
- MMOC Member: No
Trafficator switch
- Attachments
-
- IMG_0944.jpeg (2.51 MiB) Viewed 1003 times
-
- IMG_0945.jpeg (2.69 MiB) Viewed 1003 times
-
- Minor Fan
- Posts: 434
- Joined: Wed Jun 07, 2017 11:37 pm
- Location: Carmarthenshire
- MMOC Member: No
Re: Trafficator switch
With your tester bulb, make sure you have the supply going to the terminal marked F, it is possible you have connected the supply to the L terminal, if so they just need swapping over.
Regards John
Regards John
-
- Minor Friendly
- Posts: 63
- Joined: Fri Aug 28, 2009 11:47 am
- Location: Kent
- MMOC Member: No
Re: Trafficator switch
Hi John,
Many thanks and yes that you were right.
Both working ok.
Mike
Many thanks and yes that you were right.
Both working ok.
Mike
-
- Minor Fan
- Posts: 434
- Joined: Wed Jun 07, 2017 11:37 pm
- Location: Carmarthenshire
- MMOC Member: No
Re: Trafficator switch
Glad to be of assistance.
Thanks for letting us know the outcome, so many times a thread comes to a dead end.
Regards John
Thanks for letting us know the outcome, so many times a thread comes to a dead end.
Regards John