Part identification

[Bill_qaz]

After removing and checking needle valve on AUD13 carb I found this on work bench. Does anyone recognise it. Checked the carburettor parts diagrams but cannot identify it.
Possibly from the many other she'd projects.

20240410_193857.jpg (186.62 KiB) Viewed 243 times

[svenedin]

It's the cover over the carburettor float bowl breather/overflow hole isn't it?

Stephen

IMG_9792.jpeg (1.86 MiB) Viewed 235 times

[Bill_qaz]

Thanks Stephen it must of fallen off the pipe, I will put it back when new viton needle valve turns up. Couldn't see it on my picture as its under the pipe.

20240323_125936.jpg (1.53 MiB) Viewed 227 times

[svenedin]

You're welcome Bill.

Stephen

[Bill_qaz]

Strange not on Burlen parts diagram

Screenshot_20240410-203415_Samsung Internet.jpg (14.97 KiB) Viewed 223 times

[svenedin]

Even more strange that the float lid in that diagram is from a twin HS2 setup!

You can clearly see the part here though: https://www.morrisminorspares.com/fuel- ... s2-p830672

So it is still used on new float lids. That black float by the way is the "stay-up" type. It is supposedly impervious to ethanol and is made of a type of foam rather than being hollow so it cannot leak and sink.


Stephen

[Bill_qaz]

I think the common cost saving in the industry of using illustrations for multiple products.
They list it as "SU Carburettors and Spares for Morris Minor 1098 cc HS2 1962 to 1970"
https://sucarb.co.uk/carbspec/carburett ... es/id/1907

[svenedin]

I think the common cost saving in the industry of using illustrations for multiple products.
They list it as "SU Carburettors and Spares for Morris Minor 1098 cc HS2 1962 to 1970"
https://sucarb.co.uk/carbspec/carburett ... es/id/1907

Yes Burlen completely redesigned their website a few years ago and it is much more difficult to use than it was......

Stephen

[Bill_qaz]

Back where it belongs

20240411_193535.jpg (526.07 KiB) Viewed 149 times

[svenedin]

Excellent!