How to connect a DR3A wiper motor?
Posted: Sat Apr 02, 2016 11:29 am
Hi,
A few years ago a workshop had re-connected the wiper motor(Lucas DR3A single speed) in such a way that the auto-park feature stopped working.
Starting from Down to Up there are 3 spade connectors. The middle one has a notch/slit that matches one of the spade 'raised' connectors. I'm not sure if what appears to be a spade connector on the top round cap is actually one?
I found many wiring diagrams online, but all were for a 2 speed motor and not the 'single speed' diagram that I want.
1. From Down to Up , which should be Positive and which Earth?
2. Should the motor have 3 or more connections?
In the attached picture, connecting Earth/Negative to the First spade connector and Positive to second(Down to Up) directly to the battery works fine.
Thank you.
(Note: The green wire you see in the far right side of the pictures was put there recently to replace the spoilt brown/maroon colour wire on the top round cap)
[frame][/frame][frame][/frame]
A few years ago a workshop had re-connected the wiper motor(Lucas DR3A single speed) in such a way that the auto-park feature stopped working.
Starting from Down to Up there are 3 spade connectors. The middle one has a notch/slit that matches one of the spade 'raised' connectors. I'm not sure if what appears to be a spade connector on the top round cap is actually one?
I found many wiring diagrams online, but all were for a 2 speed motor and not the 'single speed' diagram that I want.
1. From Down to Up , which should be Positive and which Earth?
2. Should the motor have 3 or more connections?
In the attached picture, connecting Earth/Negative to the First spade connector and Positive to second(Down to Up) directly to the battery works fine.
Thank you.
(Note: The green wire you see in the far right side of the pictures was put there recently to replace the spoilt brown/maroon colour wire on the top round cap)
[frame][/frame][frame][/frame]