Hi Y'All,
Does anyone know what thread the steering rack track rods are? The bit that the track rod end screws onto.
Thanks for the help
Steering Track Rod End Thread Size
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 283
- Joined: Fri Feb 02, 2007 6:26 pm
- Location: Rural Hertfordshire. Rural Suffolk some weekends!
- MMOC Member: No
Steering Track Rod End Thread Size
MMOC Nationals Custom Class Winner 2011!
1966 V8 Convertible now reborn
1966 V8 Convertible now reborn
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Steering Track Rod End Thread Size
I suspect it's the thread type he needs. If you could ask for a bsf and unf bolt/set screw of that size and compare or even buy a couple of nuts that would tell you. Or check the tpi and phone a supplier for info.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Steering Track Rod End Thread Size
9/16 BSF, 5/8 UNF. See topic on Series MM messageboard
[sig]3580[/sig]
-
- Minor Fan
- Posts: 283
- Joined: Fri Feb 02, 2007 6:26 pm
- Location: Rural Hertfordshire. Rural Suffolk some weekends!
- MMOC Member: No
Re: Steering Track Rod End Thread Size
Thank you all for the replies.
Much appreciated.
Much appreciated.
MMOC Nationals Custom Class Winner 2011!
1966 V8 Convertible now reborn
1966 V8 Convertible now reborn