Steering rack
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Steering rack
Hi
I’m preparing my steering rack before installing and have a few queries please:
1 In a video I saw online someone had put grease on the rack but I don’t think it is necessary. Am I right?
2 What is the best oil to use?
3 The manual says don’t overfill, no more than 10 strokes of an oil gun. I haven’t got an oil gun so how much would that be?
4 I’m changing the gaiters and the track rod ends, is there anything else I should be doing?
Thanks
I’m preparing my steering rack before installing and have a few queries please:
1 In a video I saw online someone had put grease on the rack but I don’t think it is necessary. Am I right?
2 What is the best oil to use?
3 The manual says don’t overfill, no more than 10 strokes of an oil gun. I haven’t got an oil gun so how much would that be?
4 I’m changing the gaiters and the track rod ends, is there anything else I should be doing?
Thanks
Re: Steering rack
There are 2 damper pads items 3 and 7 on the diagram. These are in contact with the shaft and they wear. Only the Secondary pad seems to be available (ESM). Easy to change by unscrewing caps 5 and 9.
When I overhauled mine I fitted one end of the bellows poured in the oil and then fitted the free end of the bellows. Filled with diff oil 280ml.
When I overhauled mine I fitted one end of the bellows poured in the oil and then fitted the free end of the bellows. Filled with diff oil 280ml.
- Attachments
-
- Steering Rack.jpeg (897.75 KiB) Viewed 9100 times
-
- Minor Fan
- Posts: 475
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Re: Steering rack
Mines packed with 00EP grade semi fluid lithium grease. I found that it doesn't leak out.
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Thank you for your responses.
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Can I use the same oil in the diff and the steering gear?
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Sorry Pete, you've already said I can.
-
- Minor Fan
- Posts: 181
- Joined: Tue May 14, 2019 4:49 pm
- Location: Staffordshire Moorlands
- MMOC Member: No
Re: Steering rack
The Nuffield published lubrication chart for the Minor 1000 and Series 2 specifies Castrol Hypoy oil (EP90)at 12000 miles intervals. Application, maximum 10 "pumps" using a grease gun.
I use an EP90, GL4 oil and a small dedicated grease gun which does the job perfectly.
I use an EP90, GL4 oil and a small dedicated grease gun which does the job perfectly.
-
- Minor Maniac
- Posts: 10908
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: Steering rack
Olonas
You are correct as regards the grade of lubrication for the steering rack but the oil does not get to all parts of the rack and when it does it does not stay in place but gravitates to the lowest point inside the rack and especially to the bellows.
Mixing EP90 GL4 and general purpose grease does give additional help but is still not the ideal solution.
The solution - additional grease nipples.
It should be noted that the one factory fitted nipple is a ENOTS type oil nipple and not a grease nipple. The oil nipple can be changed to a grease nipple to facilitate the transfer of oil or grease from the gun to the rack.
To overcome the lack of lubricant reaching all parts of the rack I have fitted additional grease nipples to the Minor rack which can be serviced without difficulty or dismantling via the underside of the O/S wing..
See below:-
You are correct as regards the grade of lubrication for the steering rack but the oil does not get to all parts of the rack and when it does it does not stay in place but gravitates to the lowest point inside the rack and especially to the bellows.
Mixing EP90 GL4 and general purpose grease does give additional help but is still not the ideal solution.
The solution - additional grease nipples.
It should be noted that the one factory fitted nipple is a ENOTS type oil nipple and not a grease nipple. The oil nipple can be changed to a grease nipple to facilitate the transfer of oil or grease from the gun to the rack.
To overcome the lack of lubricant reaching all parts of the rack I have fitted additional grease nipples to the Minor rack which can be serviced without difficulty or dismantling via the underside of the O/S wing..
See below:-
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Thank you gents. Great advice as usual Phil.
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Hi
could you tell me how much oil to put in the steering rack as it says not to overfill.
Thanks
could you tell me how much oil to put in the steering rack as it says not to overfill.
Thanks
-
- Minor Fan
- Posts: 475
- Joined: Thu May 11, 2017 8:23 pm
- Location: South Cheshire
- MMOC Member: Yes
Re: Steering rack
If you overfill it the excess oil will leak out of the gaiters anyway.
-
- Minor Legend
- Posts: 2570
- Joined: Tue Jan 29, 2013 10:32 pm
- Location: Kernow
- MMOC Member: Yes
Re: Steering rack
Just use common sense. The reason not to overfill is because as you steer the car, the bellows contract and expand again and if it is too full, the bellows may split on the contraction. I think you'd have to fill it pretty full of oil for that to happen. As regards grease, the EP90 oil does thicken somewhat over time anyway in the rack.
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Thank you for your responses. I was hoping someone could tell me how many milli litres to put in.
-
- Minor Legend
- Posts: 2570
- Joined: Tue Jan 29, 2013 10:32 pm
- Location: Kernow
- MMOC Member: Yes
Re: Steering rack
Well, the manual says to "pump approximately 1/2 pint (0.28l) of hypoid oil....into the rack housing through the nipple.." on re-assembly of the steering gear.
-
- Minor Friendly
- Posts: 89
- Joined: Wed Jan 11, 2017 11:53 pm
- Location: Pontarddulais, Swansea
- MMOC Member: Yes
Re: Steering rack
Thank you. Much appreciated.