I have a Marina 127fcc engine fitted (engine number starts 12V), can anyone suggest the best thermostat housing to use, the one it has fitted has a large spacer fitted with a hose outlet fitted, and this has a blanking hose fitted which is starting to crack.
Will a standard 1098cc Thermostat housing fit a 1275cc engine as I assume this will fgive the right fit for the top hose.
Thanks
Which thermostat Housing
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Legend
- Posts: 1956
- Joined: Wed Apr 18, 2007 7:32 am
- Location: Düsseldorf, Germany
- MMOC Member: No
Re: Which thermostat Housing
David Manners sells one specially for the 1275 / Moggy. It is not cheap. Roy's suggestion is a lot easier.
http://www.jagspares.co.uk/Morris/partd ... tno=12M220
Regards
Declan
http://www.jagspares.co.uk/Morris/partd ... tno=12M220
Regards
Declan
Regards
Declan
-
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Which thermostat Housing
We have the housing from a 'B' Series engine, not sure what is was from now as it was ~20 years ago that I got it from our local breakers yard. All I had to do was to open up the holes in it by about 1/16" to allow for the slightly different stud pattern, and the alignment with the radiator is near perfect.
Richard