Just thought Id check to see if the experts on here agree.
I am doing a bare metal respray for the engine bay and boot, and the plan is to do a couple of coats of Zinc 182 onto the bare metal followed by a couple of high build primer.....or more as necessary. Followed by x amounts of top coat cellulose until i get the finish i desire. I was just curious as to whether using the zinc 182 as a basecoat would cause reaction problems with the celly primer and top coat?
Thanks,
YG
Spraying engine bay/boot
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Addict
- Posts: 859
- Joined: Sat Aug 19, 2006 9:30 pm
- Location: North Devon
- MMOC Member: No
Spraying engine bay/boot
Ultimate rust cure for your moggy....paint it brown, at least that way you dont notice the rust as much!!
-
- Newbie
- Posts: 4
- Joined: Sun Jul 11, 2010 6:56 pm
- MMOC Member: No
Re: Spraying engine bay/boot
hope all goes well just spent the day taking mine apart now thinking help, any ideas how to sand down my front grill befor i re spray,
thanks
thanks
-
- Minor Addict
- Posts: 859
- Joined: Sat Aug 19, 2006 9:30 pm
- Location: North Devon
- MMOC Member: No
Re: Spraying engine bay/boot
The front grill is a tricky one, i tracked down a local company and had mine sandblasted, only way to get into all the difficult areas.
Ultimate rust cure for your moggy....paint it brown, at least that way you dont notice the rust as much!!
-
- Newbie
- Posts: 4
- Joined: Sun Jul 11, 2010 6:56 pm
- MMOC Member: No
Re: Spraying engine bay/boot
thanks ill look for one near me