Edd's 1969 2 door. UHU62H
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Just started restoring the drivers seat after hearing a clunk and sinking a few inches, I discovered not only have all the straps sagged or died, the frame itself has split, time for some welding....[frame][/frame]
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Also, to anyone actually reading this....
I'm going to get all my wheels blasted and coated, now I can't decide on the colour. If I should go for the Dark Silver like it says on the chart I've been reading or the old English cream, which is the popular choice, bearing in mind the car is going almond green.
Any advice on the matter would be hugely appreciated.
Edd
I'm going to get all my wheels blasted and coated, now I can't decide on the colour. If I should go for the Dark Silver like it says on the chart I've been reading or the old English cream, which is the popular choice, bearing in mind the car is going almond green.
Any advice on the matter would be hugely appreciated.
Edd
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
Re: Edd's 1969 2 door. UHU62H
Is the gramaphone an old one or a replica?Looks great!Bonnet ain't bad either ;-)
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
eBay replica! Bought for the wedding! Pretty good though!
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
Re: Edd's 1969 2 door. UHU62H
If you were going concours or all original then obviously silver, but in my opinion the almond green will look much better with cream...
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
-
- Minor Legend
- Posts: 1383
- Joined: Tue Mar 26, 2013 8:20 pm
- Location: Chelmsford, essex
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Impressive to get it roadworthty in time, as for the wheels it's down to your preferrance, after all, it's no great job to change the wheel colour later on if you change your mind.
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Edd's 1969 2 door. UHU62H
I agree with cream and that the gramaphone looks excellent, do you have a link for it on eBay?
I'm pleased you found an even better bonnet to replace the autographed one, which I see you have now lacquered and is ready to hang.
Mine had some grey parts for some time................
[frame][/frame]
................... and my seats needed the frames welding too, a common problem I'm led to believe, so you will get there.
I hope things continue well for you on all fronts.
Best wishes,
Mike.
PS: BMC -- the headlamp peaks are now gone, so no need to have me shot.......
I'm pleased you found an even better bonnet to replace the autographed one, which I see you have now lacquered and is ready to hang.
Mine had some grey parts for some time................
[frame][/frame]
................... and my seats needed the frames welding too, a common problem I'm led to believe, so you will get there.
I hope things continue well for you on all fronts.
Best wishes,
Mike.
PS: BMC -- the headlamp peaks are now gone, so no need to have me shot.......
Last edited by jagnut66 on Thu Nov 13, 2014 7:25 pm, edited 1 time in total.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
Re: Edd's 1969 2 door. UHU62H
Shame about the headlamp peaks.They're mint!!!!
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Cheers all!
Yeh I'm not going concours and I do really like the cream so I'll go that way!
Link for gramophone http://m.ebay.co.uk/itm/271652985445?nav=SEARCH
Cheers again all! New seat foam, rubber diaphragm to replace seat straps and new back straps have arrived!
Bit of welding, smidge of hammerite then reassembly!
Yeh I'm not going concours and I do really like the cream so I'll go that way!
Link for gramophone http://m.ebay.co.uk/itm/271652985445?nav=SEARCH
Cheers again all! New seat foam, rubber diaphragm to replace seat straps and new back straps have arrived!
Bit of welding, smidge of hammerite then reassembly!
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
-
- Minor Legend
- Posts: 3635
- Joined: Fri Apr 11, 2008 7:28 pm
- Location: Mansfield, Nottinghamshire.
- MMOC Member: Yes
Re: Edd's 1969 2 door. UHU62H
For my reason for removal see:Shame about the headlamp peaks.They're mint!!!!
http://www.mmoc.org.uk/viewtopic.php?f=1&t=54517
They were given away free at the last National, so hopefully someones enjoying them.
Best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels and waiting to be resprayed......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Drivers seat restoration has progressed and has been done
First stage welding the break from the previous post[frame][/frame]
Then after that it's installing the new rubber base and hammeriting the frame[frame][/frame]
Then onto new back straps[frame][/frame]
You can see the new foam behind it, it's now put back together but getting the base upholstery to fit nicely with new foam was a swear word inducing task...[frame][/frame]
So that's ready to go back in.
I've just ordered a poly tunnel, to grow morris minors....as you can see from the top photo I have no garage, so the poly tunnel will become it! I'm then moving on to removing the doors and fixing the bottoms of the usual rot!
Thanks again all,
Edd
First stage welding the break from the previous post[frame][/frame]
Then after that it's installing the new rubber base and hammeriting the frame[frame][/frame]
Then onto new back straps[frame][/frame]
You can see the new foam behind it, it's now put back together but getting the base upholstery to fit nicely with new foam was a swear word inducing task...[frame][/frame]
So that's ready to go back in.
I've just ordered a poly tunnel, to grow morris minors....as you can see from the top photo I have no garage, so the poly tunnel will become it! I'm then moving on to removing the doors and fixing the bottoms of the usual rot!
Thanks again all,
Edd
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
Re: Edd's 1969 2 door. UHU62H
Nice job, love the tear-drop too
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Cool huh! That needs some work doing, I'm hoping I can squeeze it in under the poly tunnel!
The plan is to have them both ready for the national so we can all come!
The plan is to have them both ready for the national so we can all come!
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
Re: Edd's 1969 2 door. UHU62H
Edd, you are an inspiration to us all!
To get it ready in time for the wedding was awesome work and given the circumstances and conditions I really take my hat off to you. Best of luck with the ongoing work and keep us all posted.
To get it ready in time for the wedding was awesome work and given the circumstances and conditions I really take my hat off to you. Best of luck with the ongoing work and keep us all posted.
1956 Morris Minor Series II
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
1959 MGA 1600 Roadster
1966 Jaguar Mk2 3.8 MOD
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Thanks for the kind words.
My poly tunnel has arrived ready to go up in the next few days, I'm planning on getting it resprayed and interior done for the national next year!
My poly tunnel has arrived ready to go up in the next few days, I'm planning on getting it resprayed and interior done for the national next year!
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
[frame][/frame]
Morris moved into his new house today.
First job is make a list of what needs doing and then it's door bottoms next!
Wish me luck, any advice on doing door bottoms appreciated.
Edd
Morris moved into his new house today.
First job is make a list of what needs doing and then it's door bottoms next!
Wish me luck, any advice on doing door bottoms appreciated.
Edd
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
-
- Minor Addict
- Posts: 978
- Joined: Thu Oct 04, 2012 5:01 pm
- Location: Farnborough, Hampshire
- MMOC Member: Yes
Re: Edd's 1969 2 door. UHU62H
That is exactly the same Polytunnel that I have. I've used special anchors (used for locking down pub outdoor furniture) to make sure it doesn't get blown away. I wish now that I had got a slightly longer one, as 2 moggies don't quite fit - I've had to leave the "door" flap unzipped and then clamped to the outer rear wings on the 2nd car, as a "flap". George.[frame][/frame]
'50 Low-light with 918 Side-valve engine,
'51 High-light with Side-valve 918 engine,
'55 4-dr with 803 engine,
'56 Traveller with 1098 engine.
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Ah brilliant!
Yeh I need to do some more wind protection!
Yeh I need to do some more wind protection!
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
-
- Minor Fan
- Posts: 411
- Joined: Sat Mar 20, 2010 10:15 pm
- Location: Tavistock, Devon.
- MMOC Member: No
Re: Edd's 1969 2 door. UHU62H
Started removing door hinges today...not that successful as the nuts on the top hinge are round!! Might have to drill them out with the reverse drill bit remover thingy! Darn. I caught the metal plate on the bottom hinge using a chainsaw file, thanks to MogBob for his advice on this![frame][/frame]
'If you can meet with Triumph and Disaster
And treat those two impostors just the same'
Edd, 26, Devon.
And treat those two impostors just the same'
Edd, 26, Devon.
Re: Edd's 1969 2 door. UHU62H
I hade a similar problem with my comer camper door hinges, big slot drive counter sunk screws that just wouldn't budge What I did was to get the MIG out and build weld up on the screw head a bit at a time until there was enough to grab with mole grips and they came out easily, the heat probably had a lot to do with it (even though I did have a blow lamp on it before - and they still wouldn't go) and the bonus was I cleaned them up, cut new slots into them and re-used them . Did the same thing with a sheared off exhaust manifold stud on the same van.
Looks horrible, but it works
Looks horrible, but it works