Brake servo
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Fan
- Posts: 226
- Joined: Wed Aug 19, 2015 6:18 am
- Location: Nr. Newark
- MMOC Member: No
Brake servo
Hi I am considering fitting a servo on my recently restored van . I have fitted marina disc brakes and remote filler but the pedal needs a considerable amount of pressure to get the.wheels to lock. Has anybody got any feedback on the power tune lockheed type units priced at £76-50
-
- Minor Legend
- Posts: 1063
- Joined: Tue Nov 08, 2016 3:18 pm
- Location: Manchester ( Damp and Miserable ) and that's just the wife...
- MMOC Member: Yes
Re: Brake servo
Sorry to say but I've been told by Hydraulic re-commissioners that they are " MY FAVOURITE CAR IS A DATSUN CHERRY " , their words not mine , the rubbers seals are cheap and nasty , as is the metal casting , the other parts of it are up to standard and re-useable.
John
John
-
- Minor Legend
- Posts: 1063
- Joined: Tue Nov 08, 2016 3:18 pm
- Location: Manchester ( Damp and Miserable ) and that's just the wife...
- MMOC Member: Yes
Re: Brake servo
Swear word censorship.........
John
John
Re: Brake servo
i think they are made in a far off eastern country and therefore i would avoid given its a critical brake part and i am sure other members have had issues with them
- Monty-4
- Minor Addict
- Posts: 699
- Joined: Sun Oct 26, 2014 7:17 pm
- Location: Gloucestershire
- MMOC Member: Yes
Re: Brake servo
Better but significantly more expensive units are available. Perhaps give Frontline Developments a call?
68' 4-door Saloon, another 'Monty'.
-
- Minor Fan
- Posts: 226
- Joined: Wed Aug 19, 2015 6:18 am
- Location: Nr. Newark
- MMOC Member: No
Re: Brake servo
Hi thanks for your replys I have just purchased a genuine Lockheed servo just need to fit it now
-
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Brake servo
Presumably you are going to fit it so that both front and rear brakes are 'servo'd'? May sound a stupid comment, but if you simply interrupt the brake line running from the master cylinder running towards the front of the car, which has been done, then only the front brakes will have the benefit of the servo!
The rear brakes a fed directly from the back of the master cylinder, and when fitting a servo, the supply to them must be re-routed to the front and after the servo.
What size rear brake cylinders are fitted? The early Minors, with the 7" front brakes, were originally fitted with 7/8" rear cylinders, which were always too large and would lock the rear brakes very easily. The problem is exacerbated when fitting discs to the front, as the line pressures are higher. With or without discs, I would always fit the later 3/4" rear cylinders from the 1098 engined cars and 8" front brakes.
The rear brakes a fed directly from the back of the master cylinder, and when fitting a servo, the supply to them must be re-routed to the front and after the servo.
What size rear brake cylinders are fitted? The early Minors, with the 7" front brakes, were originally fitted with 7/8" rear cylinders, which were always too large and would lock the rear brakes very easily. The problem is exacerbated when fitting discs to the front, as the line pressures are higher. With or without discs, I would always fit the later 3/4" rear cylinders from the 1098 engined cars and 8" front brakes.
Richard
-
- Minor Fan
- Posts: 226
- Joined: Wed Aug 19, 2015 6:18 am
- Location: Nr. Newark
- MMOC Member: No
Re: Brake servo
Hi islipminor. Yes I will be fitting the rear brakes after the servo so back and front are after the servo , I have a 1275 engine and have fitted marina disc brakes the m/c is I am pretty sure 7/8 inch. , I have also fitted the remote filler
Thanks for the info
Thanks for the info
- geoberni
- Minor Legend
- Posts: 3652
- Joined: Fri Aug 04, 2017 11:19 am
- Location: North Leicestershire
- MMOC Member: Yes
Re: Brake servo
Well a little tip for you; if you use the PREVIEW Button before SUBMIT you'd see what has been changed..... The list of words that are changed by the filter is quite small, so 'bullshit' as one word will get through, but if you hyphenate it..... you'll just be another Datsun Cherry lover...
Basil the 1955 series II