Morris Minor Owners Club

it's been that long since i turned the steering wheel in my 66 2dr i've forgot if the indicators are self cancelling or not. if not i've got a problem in the coloum switch gear i think. its been in the shed since i took it off over 12 months ago and i did'nt need to use it as the car came on a trail...

wow!!!!!!!!!!
£10.50 +vat + postage
not cheap are they. will have another look around and try and find it. if not i'am going to have to bite the bullit.
and looking at that pic from the link there's lots of £10.50's there

bit touch and go. but it was well slack at 290c.

bang it on the barbi for about 30 min .in the colder months make sure your burning propane gas, orange bottle. butane, blue bottle burns slowly at the colder temps and freezes at 0c.check the temp if you can with a probe. i got mine on at 299c. eazy pezy.

stripped the dizzy down and guess what. those little balance weight springs go with a bounce don't they. lost totally. turned the garage upside down and where the little blighter got to is anybodys guess. does any one have a contact to purchase said springs. might be a good idea to change em both Doh

barbi works fine. cracked it up, placed the ring gear above the coals, attached a temp probe and shut the lid. left it for 30 mins on max and the temp had hit 301c. big pair of welding gloves and it went on a trteat. bit like waving a pencil in the albert hall. nice

the ring gear on my 66 1098 saloon has got a section of about 5" long with some serious wear and the rest is well worn.
has any one taken off the gear and fit a new one?
i would rather pay £20 for a new gear than £80 for a new flywheel

oops!

66 2dr saloon. ive inserted a photo. if you zoom in you can see the metal clip at the top and bottom. i took it out for the strip down and would you believe it i threw it out with a load of rusty bits. doh! any way i managed to locate another and a rubber but have no idea how to re fit. ive put the ...

you ca nt beat a glass of Black Sheep an open fire and stone floors, no jukebox and no plastic plants. heaven!
do these pubs still exist. Might go and start a thread in General Disscussion

has anyone refittted the metal 2 piece insert into the windscreen rubber?
and if so how?

just found this on ebay
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT

DeClan
keep us posted.

http://www.moss-europe.co.uk/Shop/ViewP ... exID=17091
scrol down for some damper oil

662dr in dove grey.
any one know the paint code for the red body stripe?

662dr saloon in dove grey.
what colour is the wing piping and should it go in the front wings as well ?

has any one had any chrome work re plated?
can anyone recomend a plater around the wakefield/leeds area?

no gas mig welders use a wire that is hollow, it contains a flux to shield the arc. electrodes have the flux on the outside to do the same job. having all that flux floating around a wire with a diameter of 0.6mm is a right pain.ok if your welding plate, above 6mm and can take the heat and a wire of...

i have a 66 2dr saloon that has been totaly striped back to the bare shell. for the rebuild i wish to run the engine with an alternator. There is not a wire left on the car, the loom was removed and ditched because it was complete trash and looked a mess. i know that you can buy looms for use with a...

i once saw a small hand pinstrip machine on ebay. it had a container for the paint and a wheel that ran in the container and picked up the paint. it came with wheels of varying thicknesses for different stripes. looked the part and went through the roof at the auction end.someone realy wanted it. mu...