Bought a moggie with distributor in situ but no distributor cap or leads. I notice there are distributor caps that have the leads coming out the sides on some models. Does it matter which I use?
Its a 948cc engine.
Any help appreciated.
Which distributor cap?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Which distributor cap?
Personal choice, for an A series engine I think that a side entry cap gives a neater HT lead run, for a side valve I prefer a top entry cap.
[sig]3580[/sig]
Re: Which distributor cap?
Must be a cap for the 25D dizzy......not for the 45D !! Otherwise - lead posn doesn't matter.
-
- Minor Friendly
- Posts: 33
- Joined: Mon Nov 11, 2013 4:58 pm
- MMOC Member: No
Re: Which distributor cap?
Hi BMC just wanted to ask, is the 25D for 948 and smaller engines and 45D for 1098 and bigger??
or could I use a 25D in a 1098 engine??
Thanks.
or could I use a 25D in a 1098 engine??
Thanks.
Re: Which distributor cap?
The 25D was standard for most 948 engines and all 1098. The 45D was developed later for use in the Mini (and others..) and is a better dizzy.
-
- Minor Friendly
- Posts: 33
- Joined: Mon Nov 11, 2013 4:58 pm
- MMOC Member: No
Re: Which distributor cap?
ok thanks