Can somebody please advise me of the correct torque settings for the following. Block is "A" Marina 1275. Head is MG Metro "Big Valve".
1. Front pulley bolt. (on crank)
2. Rocker posts.
3. Cylinder head nuts
4. Water pump bolts (two types)
5. Flywheel bolts.
Many thanks
Tom
1275cc "A" Marina engine torque settings
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 22
- Joined: Wed Jul 27, 2016 5:46 pm
- MMOC Member: No
Re: 1275cc "A" Marina engine torque settings
In the order you list
75ft lb
24
50
? Probably 20-24
40
To be precise these figures are from an Ital manual,(1275)
75ft lb
24
50
? Probably 20-24
40
To be precise these figures are from an Ital manual,(1275)
-
- Minor Maniac
- Posts: 10907
- Joined: Thu Jul 19, 2012 12:05 pm
- Location: Hampshire
- MMOC Member: Yes
Re: 1275cc "A" Marina engine torque settings
The water pump retaining bolts are 17lb ft - taken from BL Marina/Ital wksp manual.
Phil
Phil
-
- Minor Friendly
- Posts: 22
- Joined: Wed Jul 27, 2016 5:46 pm
- MMOC Member: No
Re: 1275cc "A" Marina engine torque settings
Thanks chaps, much obliged.