wheel arches

Post by **moggiemadman** » Mon Feb 09, 2009 9:22 pm

does anyone know if you can buy wheel arches for the moggie? or if not any tips on making some?

cheers
John

Post by **PSL184** » Mon Feb 09, 2009 10:15 pm

What do you mean by wheel arches, John? The moggie doesn't really have wheel arches in the typical sense as they are part of the whole wing which easily (!) bolts on..... ?

Post by **Dean** » Mon Feb 09, 2009 10:27 pm

Do you mean plastic inserts to protect the inside of the wings from road grime?

Post by **moggiemadman** » Mon Feb 09, 2009 10:47 pm

nono,like a body kit kind of wheel arch!

Post by **ASL642** » Mon Feb 09, 2009 11:31 pm

Have you tried posting in the Custom & Modified section as I think what you're after is the enlarged rear wings like a few of those cars have.

Post by **toginthemog** » Mon Feb 09, 2009 11:34 pm

did I see JLH do wider wings

Post by **moggiemadman** » Tue Feb 10, 2009 1:55 pm

i can make the wings wider myself,But im looking to buy/make arches heres a pic

Post by **bmcecosse** » Tue Feb 10, 2009 5:41 pm

Well - just buy the big Mini ones intended for 13" wheels !
Minispares probably best bet.

Post by **moggiemadman** » Tue Feb 10, 2009 6:24 pm

??? but a morris minor wing is diffent to a mini wing so they wont line up no ?

Post by **BigDawgV8** » Tue Feb 10, 2009 8:18 pm

Hi,

Do what I did and use trailer wings (one cut in half in fact) and weld it onto the existing wing with suitable clearance (obviously!)
Mine look very similar to the Mini ones in your Sig Pic.

Post by **moggiemadman** » Tue Feb 10, 2009 11:52 pm

thats not a bad idea any pics?

Post by **plastic_orange** » Wed Feb 11, 2009 11:21 am

I've described a few times how to modify existing wings (steel) to cover the wider wheels - check the 'spats' post.

Pete

Post by **BigDawgV8** » Wed Feb 11, 2009 8:30 pm

moggiemadman wrote:thats not a bad idea any pics?

Yep, have a look here (the yellow Convertible);-

http://www.morrisminoroc.co.uk/index.ph ... nal+photos

Cheers

Martin

Post by **mickessex** » Thu Feb 12, 2009 5:11 pm

Do you mean wheel arches like this:

Member on the other board has these, you could try contacting him, he may sell them to you or tell you where he got them.

Check out this thread www.morrisowners.co.uk

Mick

Post by **jonathon** » Thu Feb 12, 2009 8:05 pm

Or this

Post by **PSL184** » Thu Feb 12, 2009 8:39 pm

Hmmmm, a sprung mounted engine ???

Post by **ratrodmog** » Thu Feb 12, 2009 8:43 pm

Jonathon, do you sell these or are they just a one off? I was looking at trying to fit a set of Mini Special arches to the rear to cover my 8" wide slot mags

Anyone else tried this out of interest? The Mini arches are only about £12 for four and plastic so easily cut and shaped.

Post by **jonathon** » Thu Feb 12, 2009 10:03 pm

Like this

Yes they are available but PM me for details