Hazard lights?
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 33
- Joined: Sat Oct 27, 2012 8:40 pm
- Location: Nottinghamshire
- MMOC Member: No
Hazard lights?
After breaking down a few times on dark unlit roads I have decided that I want to fit Hazard lights to my Minor.
I already have indicators fitted so was wondering if there is a simple way of wiring a hazard relay to these. I already have a rough idea of what to do wiring wise but I'm unsure of exactly which hazard relay would work best (Give the correct speed of flashing).
Can anyone help me out?
Cheers,
I already have indicators fitted so was wondering if there is a simple way of wiring a hazard relay to these. I already have a rough idea of what to do wiring wise but I'm unsure of exactly which hazard relay would work best (Give the correct speed of flashing).
Can anyone help me out?
Cheers,
Lewis
-------------
1954 4-Door
-------------
1954 4-Door
-
- Minor Legend
- Posts: 2217
- Joined: Mon Nov 15, 2010 11:44 pm
- Location: West Midlands UK
- MMOC Member: No
Re: Hazard lights?
The usual suppliers sell kits to give you hazard lights.
Only a few wires (6 if I recall).
The trick is having it so that when you switch the hazards on, it disables the indicators. Otherwise you'd get back feeding and much confusion. This is taken care of by the kit (hence the extra wires).
Wires:
Live feed from battery (better to be permanent live so that you can put them on with the engine off)
Earth
Flash feed to left indicators
Flash feed to right indicators
And a pair of wires which make and break the live feed to the standard indicator flasher (to disable indicators when hazards are on)
Fitted mine in an evening
Only a few wires (6 if I recall).
The trick is having it so that when you switch the hazards on, it disables the indicators. Otherwise you'd get back feeding and much confusion. This is taken care of by the kit (hence the extra wires).
Wires:
Live feed from battery (better to be permanent live so that you can put them on with the engine off)
Earth
Flash feed to left indicators
Flash feed to right indicators
And a pair of wires which make and break the live feed to the standard indicator flasher (to disable indicators when hazards are on)
Fitted mine in an evening
Re: Hazard lights?
Also the standard flasher unit operates 2 x 21w + 3w; the unit in the kit operates 4 x 21 + 3. As above, the kit is simple to fit and incorporates the necessary switching and flasher, so just order one.
Re: Hazard lights?
I wired mine up, based on this wiring diagram from a Marina workshop manual, using a hazard light switch from a Mini. The Mini switch, when operated, disconnects the indicator circuit and connects the hazard circuit.
[frame][/frame]
Due to the type of relay I used I have the warning light running off the switch terminal "4." The indicators are fed from an ignition switched fuse, as normal, and the hazards from an always on fuse.
[frame][/frame]
Due to the type of relay I used I have the warning light running off the switch terminal "4." The indicators are fed from an ignition switched fuse, as normal, and the hazards from an always on fuse.
-
- Minor Friendly
- Posts: 90
- Joined: Fri May 25, 2012 9:20 am
- Location: Cambridge/Sheffield
- MMOC Member: No
Re: Hazard lights?
The way I did it probably isn't the best way about it, but here goes anyway:
As I didn't want to pay the £84 to the usuals, for something that seemed so straight forward.
I wired an illuminated switch between the left and right terminals on the indicator, and replaced the standard 3 terminal flasher unit with one rated for hazard usage, and fused it to the non-ignition side.
Total cost: £15
Only downside is I have to switch on the indicator, and pull the hazard switch. Though to be honest, its not that much more effort.
I'm sure someone will tell me that'll set fire to my car, or something. But if it will, I should probably hear that now than find out the hard way...
As I didn't want to pay the £84 to the usuals, for something that seemed so straight forward.
I wired an illuminated switch between the left and right terminals on the indicator, and replaced the standard 3 terminal flasher unit with one rated for hazard usage, and fused it to the non-ignition side.
Total cost: £15
Only downside is I have to switch on the indicator, and pull the hazard switch. Though to be honest, its not that much more effort.
I'm sure someone will tell me that'll set fire to my car, or something. But if it will, I should probably hear that now than find out the hard way...
Trudy, my '56 Series II
Re: Hazard lights?
If you really MUST have useless hazards - then something like that ^^^ is fine. But how it cost anything like £15 is a mystery...... And of course there is the risk of leaving the indicators winking away when you switch off the ignition.
-
- Minor Friendly
- Posts: 90
- Joined: Fri May 25, 2012 9:20 am
- Location: Cambridge/Sheffield
- MMOC Member: No
Re: Hazard lights?
they work fine though
Illuminated switch: £9:40
Combined flasher and hazard:£6.60
Sorry, it was £16, not £15.
No more careful than making sure you've not left your normal lights on, surely?
Illuminated switch: £9:40
Combined flasher and hazard:£6.60
Sorry, it was £16, not £15.
No more careful than making sure you've not left your normal lights on, surely?
Trudy, my '56 Series II
-
- Minor Friendly
- Posts: 33
- Joined: Sat Oct 27, 2012 8:40 pm
- Location: Nottinghamshire
- MMOC Member: No
Re: Hazard lights?
Could someone point me in the direction of one of these combined flasher and hazard relay's please?
Don't want to end up wasting money on the wrong thing :/
Thanks,
Lewis
Don't want to end up wasting money on the wrong thing :/
Thanks,
Lewis
Lewis
-------------
1954 4-Door
-------------
1954 4-Door
-
- Minor Legend
- Posts: 2865
- Joined: Mon May 09, 2011 3:15 pm
- Location: Birmingham THE Second City & home of Aston Villa
- MMOC Member: No
Re: Hazard lights?
Hazards are supposed to flash with the ignition off
Cheers Alex
all thoughts are given in good faith but..." You pays your money and takes your choice"
[/color]
all thoughts are given in good faith but..." You pays your money and takes your choice"
[/color]
-
- Minor Friendly
- Posts: 33
- Joined: Sat Oct 27, 2012 8:40 pm
- Location: Nottinghamshire
- MMOC Member: No
Re: Hazard lights?
Sorry meant the one Onion mentioned "Combined flasher and hazard" Would rather do it on the cheap as £70 seem an awful lot for a bit of wiring and a switch/relay.onion wrote:
Illuminated switch: £9:40
Combined flasher and hazard:£6.60
Sorry, it was £16, not £15.
Thanks,
Lewis
Lewis
-------------
1954 4-Door
-------------
1954 4-Door
-
- Minor Friendly
- Posts: 90
- Joined: Fri May 25, 2012 9:20 am
- Location: Cambridge/Sheffield
- MMOC Member: No
Re: Hazard lights?
http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114 is the one I usedLewisd wrote: Sorry meant the one Onion mentioned "Combined flasher and hazard" Would rather do it on the cheap as £70 seem an awful lot for a bit of wiring and a switch/relay.
Thanks,
Lewis
Trudy, my '56 Series II
-
- Minor Friendly
- Posts: 33
- Joined: Sat Oct 27, 2012 8:40 pm
- Location: Nottinghamshire
- MMOC Member: No
Re: Hazard lights?
Thanks for the help.
Will get the parts soon and fit over christmas.
Lewis
Will get the parts soon and fit over christmas.
Lewis
Lewis
-------------
1954 4-Door
-------------
1954 4-Door
-
- Minor Addict
- Posts: 662
- Joined: Wed Apr 05, 2006 9:47 am
- Location: Was in Essex, now in Norfolk
- MMOC Member: No
Re: Hazard lights?
You can get all in one relay/switch/warning lights other than the lucas ones. I have one similar in style to this type for a vw. http://www.ebay.co.uk/itm/181041800219? ... 1438.l2649 Don't know if this one would fit though.
-
- Minor Friendly
- Posts: 33
- Joined: Sat Oct 27, 2012 8:40 pm
- Location: Nottinghamshire
- MMOC Member: No
Re: Hazard lights?
Thanks everyone for the help finally got round to doing the hazard lights today
They work perfectly and I thought I would include a little diagram of how I did it just incase it helps anyone else.
I used the method which Onion described, Firstly I replaced the standard flasher unit with one which is rated for use with hazard lights
Found Here: http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Once that was fitted it is just a case of fitting a switch which would cross the left and right hand indicator circuits together so that when the switch is operated power is sent to all four corners of the car. I used a toggle switch I had lying around but any switch will do
http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Finally all you need to do is wire the switch between the left and right hand contacts on the indicator switch and it should be fully working. This method does require the ignition to be on and you to turn both the hazard light switch and indicator switch on for it to work which I believe will not pass an MOT but it works for me and is far safer when I end up breaking down on a busy road.
Here is a little diagram I made up and I hope this helps someone out
[frame][/frame]
Cheers,
Lewis
They work perfectly and I thought I would include a little diagram of how I did it just incase it helps anyone else.
I used the method which Onion described, Firstly I replaced the standard flasher unit with one which is rated for use with hazard lights
Found Here: http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Once that was fitted it is just a case of fitting a switch which would cross the left and right hand indicator circuits together so that when the switch is operated power is sent to all four corners of the car. I used a toggle switch I had lying around but any switch will do
http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Finally all you need to do is wire the switch between the left and right hand contacts on the indicator switch and it should be fully working. This method does require the ignition to be on and you to turn both the hazard light switch and indicator switch on for it to work which I believe will not pass an MOT but it works for me and is far safer when I end up breaking down on a busy road.
Here is a little diagram I made up and I hope this helps someone out
[frame][/frame]
Cheers,
Lewis
Lewis
-------------
1954 4-Door
-------------
1954 4-Door
-
- Minor Addict
- Posts: 519
- Joined: Fri May 07, 2010 10:47 pm
- Location: Golborne Nr Wigan
- MMOC Member: No
Re: Hazard lights?
Lewisd wrote:Thanks everyone for the help finally got round to doing the hazard lights today
They work perfectly and I thought I would include a little diagram of how I did it just incase it helps anyone else.
I used the method which Onion described, Firstly I replaced the standard flasher unit with one which is rated for use with hazard lights
Found Here: http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Once that was fitted it is just a case of fitting a switch which would cross the left and right hand indicator circuits together so that when the switch is operated power is sent to all four corners of the car. I used a toggle switch I had lying around but any switch will do
http://morrisminorspares.co.uk/shop/pro ... 9f0ef17114
Finally all you need to do is wire the switch between the left and right hand contacts on the indicator switch and it should be fully working. This method does require the ignition to be on and you to turn both the hazard light switch and indicator switch on for it to work which I believe will not pass an MOT but it works for me and is far safer when I end up breaking down on a busy road.
Here is a little diagram I made up and I hope this helps someone out
[frame][/frame]
Cheers,
Lewis
This method would result in an MoT fail. The hazzards MUST work with ignition in the on AND the off position, this will be tested as it's the "method of Inspection" (MOI) also they must work with only 1 switch and NOT 2 as tou have it now.
-
- Minor Legend
- Posts: 1565
- Joined: Fri Aug 05, 2011 9:53 pm
- Location: Leeds, West Yorkshire
- MMOC Member: No
Re: Hazard lights?
Moss do a hazard kit, and a free fitting instruction set. http://www.moss-europe.co.uk/graphics/u ... GSS159.pdf
As stated it will fail an mot if the circuit does not work with the ignition off.
As stated it will fail an mot if the circuit does not work with the ignition off.
Richard
Opinions are like people,everyone can be different.
Opinions are like people,everyone can be different.
-
- Series MM Registrar
- Posts: 10183
- Joined: Sun Jul 24, 2005 11:39 pm
- Location: Reading
- MMOC Member: No
Re: Hazard lights?
.bmcecosse wrote:If you really MUST have useless hazards -
I found them anything but useless when THE COIL packed up on an unlit main road last week
[sig]3580[/sig]
-
- Minor Legend
- Posts: 2147
- Joined: Mon May 10, 2004 9:10 pm
- Location: Oxford, UK
- MMOC Member: Yes
Re: Hazard lights?
The MOT requirements falls into the catagery that if fitted they must work - from the MOT Inspection Manual:
'Hazard warning devices are not required on vehicles first used before 1 April 1986, but if one is fitted it must be tested.'
B. Hazard Warning Device
1. Check that the hazard warning device:
a. is fitted (where required)
b. is working
c. operates using only one switch
d. switch for presence, security and operation
e. ‘tell-tale’ is working correctly
f. operates all the direction indicators simultaneously with the ignition switched both on and off.
There have been a number of occasions that I have found them very useful, and would certainly not be without them.
'Hazard warning devices are not required on vehicles first used before 1 April 1986, but if one is fitted it must be tested.'
B. Hazard Warning Device
1. Check that the hazard warning device:
a. is fitted (where required)
b. is working
c. operates using only one switch
d. switch for presence, security and operation
e. ‘tell-tale’ is working correctly
f. operates all the direction indicators simultaneously with the ignition switched both on and off.
There have been a number of occasions that I have found them very useful, and would certainly not be without them.
Richard
-
- Minor Friendly
- Posts: 90
- Joined: Fri May 25, 2012 9:20 am
- Location: Cambridge/Sheffield
- MMOC Member: No
Re: Hazard lights?
The glory of this set up is that it can be taken off in the car park of the MOT center, so they don't even know one was fitted.IslipMinor wrote:The MOT requirements falls into the catagery that if fitted they must work - from the MOT Inspection Manual:
'Hazard warning devices are not required on vehicles first used before 1 April 1986, but if one is fitted it must be tested.'
And I did switch my indicators onto a non-ignition circuit, so it would have only failed on the 2 switch criteria
As you say, I wouldn't want to drive very far without them. Fortunately I haven't had need to use them yet (touch wood), but when I've tested them they are as bright as the standard indicators, and I doubt the proper kit makes them significantly more dazzling.
I'm glad they've worked for you as well, Lewis. Though I would advise detaching them before an MOT, for reasons previously discussed.
Trudy, my '56 Series II